Netgear R8000 User Manual - Page 13
Cable Your Router, LED On/Off, Power On/Off
View all Netgear R8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router • Place the router away from large metal surfaces, large glass surfaces, and insulated walls such as these: - Solid metal doors - Aluminum studs - Fish tanks - Mirrors - Brick - Concrete Cable Your Router The following image shows how to cable your router: Ethernet cable DSL or cable Router Ethernet cable Modem Power adapter Figure 4. Router cabling To cable your router: 1. Unplug your modem's power, leaving the modem connected to the wall jack for your Internet service. If your modem uses a battery backup, remove the battery. 2. Plug in and turn on your modem. If your modem uses a battery backup, put the battery back in. 3. Connect your modem to the Internet port of your router with the yellow Ethernet cable that came with your router. 4. Connect the power adapter to your router and plug the power adapter into an outlet. 5. Slide the LED On/Off switch on the rear panel to the on position. 6. Press the Power On/Off button on the rear panel of the router. Hardware Setup 13