Netgear R8000 User Manual - Page 161
Troubleshoot Internet Browsing, admin, password, ADVANCED, Connection Status, Connect
View all Netgear R8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Nighthawk X6 AC3200 Tri-Band WiFi Router A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Click the ADVANCED tab. The ADVANCED Home screen displays. 5. In the Internet Port pane, click the Connection Status button. The Connection Status screen displays. 6. Check the Connection Status screen to see if your PPPoE connection is up and working. If you don't have a connection, click the Connect button. The router continues to attempt to connect indefinitely. 7. If you cannot connect after several minutes, the router might be set up with an incorrect service name, user name, or password, or your ISP might have a provisioning problem. Unless you connect manually, the router does not authenticate using PPPoE until data is transmitted to the network. Troubleshoot Internet Browsing If your router can obtain an IP address but your computer is unable to load any web pages from the Internet, check the following: • Your computer might not recognize any DNS server addresses. A DNS server is a host on the Internet that translates Internet names (such as www addresses) to numeric IP addresses. Typically, your ISP provides the addresses of one or two DNS servers for your use. If you entered a DNS address during the router's configuration, restart your computer. Alternatively, you can configure your computer manually with a DNS address, as explained in the documentation for your computer. • Your computer might not have the router configured as its default gateway. Reboot the computer and verify that the router address (www.routerlogin.net) is listed by your computer as the default gateway address. • You might be running login software that is no longer needed. If your ISP provided a program to log you in to the Internet (such as WinPoET), you no longer need to run that software after installing your router. You might need to go to Internet Explorer and select Tools > Internet Options, click the Connections tab, and select the Never dial a connection. Troubleshooting 161