Netgear RT311 RT314 Reference Manual - Page 28

Refer to these diagrams to identify all the ports on the router when you attempt to make

Page 28 highlights

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers You can use some of the LEDs to verify connections. Table 2-1 lists and describes each LED on the front panel of the router. These LEDs are green when lit. Table 2-1. LED Descriptions Label Activity PWR (Power) On Off TEST On Off Blinking LOCAL LNK/ACT (Link/Activity) On Blinking 100 (100 Mbps) On Off INTERNET LNK/ACT On (Link/Activity) Blinking Description Power is supplied to the router. Power is not supplied to the router. The system is not ready or has failed to start up. The system is ready and running. The system is initializing. The LAN port has detected a link with an attached device. Data is being tranmitted or received by the LAN port. The LAN is operating at 100 Mbps. The LAN is operating at 10 Mbps. The Internet port has detected a link with an attached device. Data is being tranmitted or received by the Internet port. The rear panels of the Model RT311 router and Model RT314 router are shown in Figure 2-3 and Figure 2-4. Refer to these diagrams to identify all the ports on the router when you attempt to make any connections. Key: 1 = Ground 2 = AC adapter outlet for connecting the AC adapter to the router 3 = Local Ethernet port for connecting the router to the local LAN 4 = Internet Ethernet port for connecting the router to a cable or DSL modem 5 = RS-232 Manager port for connecting the router to the serial port of a PC Figure 2-3. RT311 Rear Panel 2-4 Installing and Connecting the Router

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers
2-4
Installing and Connecting the Router
You can use some of the LEDs to verify connections.
Table 2-1
lists and describes each LED on
the front panel of the router. These LEDs are green when lit.
The rear panels of the Model RT311 router and Model RT314 router are shown in
Figure 2-3
and
Figure 2-4
. Refer to these diagrams to identify all the ports on the router when you attempt to make
any connections.
Key:
1 = Ground
2 = AC adapter outlet for connecting the AC adapter to the router
3 = Local Ethernet port for connecting the router to the local LAN
4 = Internet Ethernet port for connecting the router to a cable or DSL modem
5 = RS-232 Manager port for connecting the router to the serial port of a PC
Figure 2-3.
RT311 Rear Panel
Table 2-1.
LED Descriptions
Label
Activity
Description
PWR (Power)
On
Off
Power is supplied to the router.
Power is not supplied to the router.
TEST
On
Off
Blinking
The system is not ready or has failed to start up.
The system is ready and running.
The system is initializing.
LOCAL
LNK/ACT
(Link/Activity)
On
Blinking
The LAN port has detected a link with an attached device.
Data is being tranmitted or received by the LAN port.
100 (100 Mbps)
On
Off
The LAN is operating at
100 Mbps.
The LAN is operating at
10 Mbps.
INTERNET LNK/ACT
(Link/Activity)
On
Blinking
The Internet port has detected a link with an attached device.
Data is being tranmitted or received by the Internet port.