Netgear RT311 RT314 Reference Manual - Page 51
Using the Manager Interface for Initial Router Configuration, Connecting for Configuration
UPC - 606449004175
View all Netgear RT311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 5 Using the Manager Interface for Initial Router Configuration This chapter contains information about basic configuration for your Model RT311 or RT314 Internet Access Gateway Router using the internal Manager interface. The initial configuration consists of: - accessing the Manager, - naming the router, - and setting up the LAN interface, including DHCP parameters to be assigned to the attached PCs. After you have performed basic router configuration, proceed to Chapter 6, "Using the Manager Interface to Configure the Router for Internet Access," and Chapter 7, "Configuring Filters," to configure Internet access and additional features. Note: You can also use the browser-based setup to configure basic router features, and later use the Manager interface to configure advanced features. Connecting for Configuration The Manager interface is accessible by a serial connection through the MANAGER port on the rear panel of your router or by a Telnet connection over the local network, as described in the following sections. Using the Manager Interface for Initial Router Configuration 5-1