Netgear RT311 RT314 Reference Manual - Page 70
In the Manager interface, open Menu 12 - IP Static Route Setup., Press [Enter].
UPC - 606449004175
View all Netgear RT311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers 4. Press [Enter]. The command interpreter displays the static IP routing table as shown in the example in Figure 6-3. ras> ip rout stat Dest FF Len Interface 192.168.0.0 00 24 enif0 default 00 0 enif1 ras> Gateway 192.168.0.1 10.118.18.1 Metric stat Timer Use 1 041b 0 0 1 001b 0 0 Figure 6-3. IP Static Routing Table Example In this example, the first route shown is the local Ethernet subnet connected to the LOCAL interface (enif0). The second route is the default route, through the INTERNET interface (enif1). All traffic from the LAN to a destination outside the LAN will be sent to the default route and will be handled by the ISP. 5. After viewing the table, type "exit" to return to the menus. To create additional static routes for IP: 1. In the Manager interface, open Menu 12 - IP Static Route Setup. 2. Select an unused number from the menu and press [Enter]. Menu 12.1 - Edit IP Static Route opens as shown in Figure 6-4. 6-6 Using the Manager Interface to Configure the Router for Internet Access