Netgear RT311 RT314 Reference Manual - Page 44
Otherwise leave Service Name blank., Proceed to Step 9.
![]() |
UPC - 606449004175
View all Netgear RT311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers 8. Click on Next to go to the ISP Parameters screen, shown in Figure 4-3 below: Figure 4-3. Browser-based Setup Wizard, second screen This screen determines whether a login program will be run. a. If your service provider does not require a login program, leave Encapsulation as Ethernet and proceed to Step 9. b. If your service provider uses PPP over Ethernet (PPPoE), select Encapsulation as PPPoE, and enter these additional parameters: • If your connection supports multiple ISPs, enter the Service Name of the one you use. Otherwise leave Service Name blank. • Enter the user name and password provided by your ISP. These fields are case sensitive. • If you wish to change the login timeout, enter a new value in seconds. Proceed to Step 9. c. If your service provider is RoadRunner AND you are required to run a RoadRunner login program, leave Encapsulation as Ethernet and select Service Type as either RR-Manager or RR-Toshiba. Enter these additional parameters:. • If your cable modem is Toshiba, select RR-Toshiba. Otherwise select RR-Manager. • Enter the user name and password provided by your ISP. These fields are case sensitive. 4-4 Using Your Browser for Configuring the Router
![](/manual_guide/products/netgear-rt314-rt314-reference-manual-1-6f5c39c/44.png)