Netgear RT311 RT314 Reference Manual - Page 71
Enter settings for the static route entry.
UPC - 606449004175
View all Netgear RT311 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers Menu 12.1 - Edit IP Static Route Route #: 1 Route Name= ? Active= No Destination IP Address= ? IP Subnet Mask= ? Gateway IP Address= ? Metric= 2 Private= No Press ENTER to Confirm or ESC to Cancel: Figure 6-4. Menu 12.1 - Edit IP Static Route 3. Enter settings for the static route entry. Table 6-2 lists and describes the fields for Menu 12.1 - Edit IP Static Route. Table 6-2. Edit IP Static Route Fields Field Route Name Active Destination IP Address IP Subnet Mask Gateway IP Address Description Enter a descriptive name for this route for identification purposes only. Use this field to activate or deactivate this static route. Enter the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. Enter the subnet mask for this destination. Enter the IP address of the gateway to the destination network. The gateway is the next router that your router contacts in order to forward packets to the destination. On the LAN, the gateway must be a router on the same segment as the router. Over the WAN, the gateway will be the IP address of the router at your ISP. Using the Manager Interface to Configure the Router for Internet Access 6-7