Netgear WPN824v3 WPN824v3 Setup Manual - Page 14
Power, Wireless, Enter, A LAN light - setup manual
View all Netgear WPN824v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Wireless Router Setup Manual Figure 9 d. Check the wireless router status lights to verify the following: • Power. The power light (1) should turn solid green. If it does not, see "Verify whether the Test light never turns on or stays on:" on page 21. • Test: The test light (2) blinks when the router is first turned on, then goes off. If after 2 minutes it is still on, see "Verify whether the Test light never turns on or stays on:" on page 21. • Wireless. The wireless light (3) should be on. • Internet: The Internet port light (4) should be lit. If it is not, make sure that the Ethernet cable is securely attached to the wireless router Internet port and that the modem, and the modem is powered on. • LAN. A LAN light (5) should be lit. Green indicates that your computer is communicating at 100 Mbps; amber indicates 10 Mbps. If a LAN light is not lit, check that the Ethernet cable from the computer to the router is securely attached at both ends, and that the computer is turned on. 3. Connect to the wireless router by typing http://www.routerlogin.net in the address field of your browser, and then click Enter. Figure 10 Connect to the wireless router by typing any one of these three URLs in the address field of your browser, then clicking Enter: • http://www.routerlogin.net • http://www.routerlogin.com • http://192.168.1.1 10 Getting to Know Your Wireless Router v1.0, August 2007