Netgear WPN824v3 WPN824v3 Setup Manual - Page 7
Router Front Panel, Table 1-1. Status Light Descriptions
View all Netgear WPN824v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Router Front Panel Wireless Router Setup Manual Figure 2 You can use the status lights on the front of the wireless router to verify various conditions. Table 1-1. Status Light Descriptions Item 1 2 Function Activity Power Test On green solid Off On Off Slow blinking Wireless On 3 Off Blinking Description Power is supplied to the router. Power is not supplied to the router. The unit is performing the power-on self-test diagnostic. The unit successfully completed the power-on self-test diagnostic. The reset button is being pushed, restoring the factory default settings. The wireless interface is enabled. The wireless interface is turned off. Data is being communicated over the wireless network. Internet Amber off No Ethernet cable is connected to the modem. Amber on The Ethernet cable connection to the modem is good. Amber blinking Packets are being transmitted and received from a modem or other 4 network device, but no IP address has been received. Green off No IP address has been received. On IP address has been received. Blinking IP address received and data is being transmitted and received. LAN 5 Green Amber The LAN port has detected a 100 Mbps link with an attached device. The LAN port has detected a 10 Mbps link with an attached device. Getting to Know Your Wireless Router 3 v1.0, August 2007