Nikon 4543 Instruction Manual - Page 18
tocomeon., picture.
![]() |
View all Nikon 4543 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
-BASIC OPERATION-continued---------- 18. Wait for the ready· light @ tocomeon. As soon as the flash ready-light built into the back of the flash unit comes on , the 88 -16 is ready to fire. With the except ion of the Nikon F2 -series, if your camera has an LED readylight inside the viewfinder, make sure that it is lit up, indicating that the 8816 is ready to fire. Note that with the Nikon FA, FE2, F-501/N 2020, F-3011 N2000, FG, FG-20 or Nikonos-V, you must first turn on the exposure meter to activate the finde r ready-l ight. 18 Notes: 1) With the 58-16A and F3·series cameras If both ready·fights blink, make sure that: a. The flash unit is securely locked in place. b. The film speed setting on the camera is within the usable range when the flash unit is used in the TTL mode. With the 58-168 and FA, FE2, F-5011N2020, F-301IN2000, FG or Nikonos-V If the camera 's ready·light blinks, check to see if: a. A mechanical setting is not used in the TTL mode. b. The film speed setting on the camera is within the usable range when the flash unit is used in the TTL mode. For more detailed information about the ready-light warning, refer to page 37. 2) If the ready·light does not come on, first make sure the batteries are properly installed. If they are, replace them with a fresh set. 19 Take the picture. • When the shutter is tripped, both the main and secondary flashes fire as the picture is taken.
![](/manual_guide/products/nikon-4543-instruction-manual-9d32db7/18.png)