Nikon 4543 Instruction Manual - Page 64
Cords, Adaptor, Flash, Tripod, Couplers
![]() |
View all Nikon 4543 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
-ACCESSORIES-continued------------ TTL Multi·Flash Sync Cords SC·18 and SC·19 The SC-18 and/or SC-19 are used to connect the flash units together for TTL multiple flash ope ration. The SC18 is 1.5m long , while the SC-19 is 3m. Flash Tripod Adaptor AS·11 The AS-11 enables the S8-16A. used as a slave flash unit, to be attached to a tripod . Also , it preven ts the S816A ready-light from blinking for no reason and lets you see when the flash is ready to fire and whether or not the flash fired at its maximum output. TTL Multi·Flash Adaptor AS·10 When you plan to perform TTL multiple flash operation with more than three flash units or to use the S8-15 or S8-18 as a slave flash unit, the AS-10 is required. With one AS-10 having three TTL multiple flash terminals , you can use up to three slave flash units including one mounted on it. A tripod socket at the bottom enables the S8-168 mounted on the AS-10 to be fi xed to a tripod . To perform TTL flash photography with two units using the S8168 as a slave flash unit or to perform TTL photography with three units using the S8-168 as a master flash unit mounted on the SC-1?, use of the AS-10 is not always needed. Without the AS-10 , however, the electrical contacts on the flash unit are uncovered and can be the cause of incorrect output control. Flash Unit Couplers AS·1, 4, 5, 6, and 7 The AS-1 , AS-4, or AS-? convert the accessory shoe of a Nikon F2 - or F3-series camera to the standard ISO-type accessory shoe, allowing direct attachment of the S8168. The AS-1 is for the F2-series camera and the AS-4 and? are for the F3 -series camera. A special feature of the AS-? is that it lets you change film without removing the flash unit. The AS-6, on the other hand, is used when you want to mount the S8 -16A directly on the Nikon FA, FE2, FM2, FE, F-501/N2020, F-301/N2000, FG, FG-20, EM or FM camera. To mount the S8-16A on an F2-series camera, the AS-5 is required . 64
![](/manual_guide/products/nikon-4543-instruction-manual-9d32db7/64.png)