Nikon SB 800 Instruction Manual - Page 105
Priority Auto A or Manual M.
UPC - 018208048014
View all Nikon SB 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Advanced operations 1 Set the camera's exposure mode to AperturePriority Auto (A) or Manual (M). 2 Set the camera's metering system to Matrix Metering Y or Center-Weighted Metering W. 3 Set the flash mode to TTL or Auto Aperture or Non-TTL auto flash. 4 Set the camera's aperture. • Refer to page 100 for setting the aperture. 5 Adjust the flash head. 6 Make sure that the ready-light is on, then shoot. • When the flash has fired at its maximum output and underexposure may have occurred, the ready-light on the SB-800 blinks for approx. 3 sec. To compensate, use a wider aperture or move closer to the subject and reshoot. 99
99
1
Set the camera’s exposure mode to Aperture-
Priority Auto (A) or Manual (M).
2
Set the camera’s metering system to Matrix
Metering
Y
or Center-Weighted Metering
W
.
3
Set the flash mode to TTL or Auto Aperture or
Non-TTL auto flash.
4
Set the camera’s aperture.
•
Refer to page 100 for setting the aperture.
5
Adjust the flash head.
6
Make sure that the ready-light is on, then shoot.
•
When the flash has fired at its maximum output and
underexposure may have occurred, the ready-light on
the SB-800 blinks for approx. 3 sec. To compensate,
use a wider aperture or move closer to the subject
and reshoot.
Advanced operations