Nikon SB 800 Instruction Manual - Page 106
Setting the aperture, Setting the flash head
![]() |
UPC - 018208048014
View all Nikon SB 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Bounce flash operation ■■■ Setting the aperture In bounce flash, there is a light loss of 2-3 stops when compared with normal flash photography. Therefore, you should use a wider aperture. When the flash head is adjusted to other than the horizontal/front position, the flash shooting distance range indicator on the SB-800 disappears. To ensure correct exposure, first confirm the flash shooting distance range and aperture with the flash head in the normal position. Next, set this aperture on the camera, then adjust the flash head to the appropriate bounce position. • In Non-TTL auto flash operation, set the same aperture on the SB-800. ■■■ Setting the flash head As shown in the illustrations, tilt or rotate the SB-800's flash head by holding down the flash head tilting/rotating lock release button and adjusting the flash head to match the shooing environment or your creative preferences. 90° 75° 60° 45° 0° 7° 30° 0° 30° Flash head tilting and rotating angles The SB-800's flash head tilts up 90° and down -7°, and rotates horizontally 180° to the left and 90° to the right. • Set the flash head at a click stop at the angles shown. • When taking close-up pictures with flash, tilt the flash head down to the -7° position (p. 102). Choosing the reflecting surface In color photography, select white or highly reflective surfaces to bounce the light off of. Otherwise, your pictures will come out with an unnatural color cast similar to that of the reflecting surface. 120° 90° 60° 60° 90° 180° 150° 100
![](/manual_guide/products/nikon-sb-800-instruction-manual-c6d8db2/106.png)