Nikon SB 800 Instruction Manual - Page 85
Setting a group and channel number on the remote flash units
![]() |
UPC - 018208048014
View all Nikon SB 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Advanced operations ■■■ Setting a group and channel number on the remote flash units 1 Press the g button on the remote flash unit to highlight the channel number, then press the e or f button to set the channel number. • Be sure to choose the same channel number as set on the master flash unit. 2 Press the g button on the remote flash unit to highlight the group, then press the e or f button to set the group. • For remote flash units where the flash mode and flash output level compensation values are to be set identically, place these flash units into the same group. v Notes on using the Nikon D70's Commander mode Be sure to set the channel number of the remote flash unit to 3 and set the group of the remote flash unit to Group A when performing wireless multiple flash using the Nikon D70's built-in flash as a master flash unit (Commander mode). Otherwise, the SB-800 does not fire. 79
![](/manual_guide/products/nikon-sb-800-instruction-manual-c6d8db2/85.png)