Nikon SB 800 Instruction Manual - Page 55
Determine the guide number according to
![]() |
UPC - 018208048014
View all Nikon SB 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Detailed operation 2 Press the a button to display q. 3 Press the g button to highlight the flash output level display, then press the e or f button to increase or decrease the values. • The available range of the flash output level is between 1/8 and 1/128. 4 Press the g button. • The flash output level is set, then the frequency display is highlighted. 5 Repeat the procedures above to set the frequency and the number of repeating flashes per frame. Frequency (Hz) Number of repeating flashes per frame 6 Determine the guide number according to the flash output level and zoom-head position set, then calculate the correct aperture from the guide number and the shooting distance. Finally set this aperture on the SB-800. • Refer to "Guide number table" (p. 42) and "Determining the aperture and flash output level in the Manual mode" (p. 42). • For cameras compatible with CLS, digital SLRs not compatible with CLS, cameras in Groups I and II with CPU lenses and COOLPIX cameras compatible with i-TTL, set the SB-800's aperture on the camera. You cannot set the aperture on the SB-800 directly. • If the ISO sensitivity is correctly set, the flash shooting distance appears on the LCD panel, matching the flash output level and aperture as set. 49
![](/manual_guide/products/nikon-sb-800-instruction-manual-c6d8db2/55.png)