Nikon SB 800 Instruction Manual - Page 98
TTL multiple flash
UPC - 018208048014
View all Nikon SB 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Multiple flash shooting using cords ■■■ TTL multiple flash (not possible with cameras compatible with CLS and digital SLRs not compatible with CLS) 1 Set the camera's exposure mode to AperturePriority Auto (A) or Manual (M). 2 Attach the master flash unit to the camera, turn the power on, and set the flash mode to TTL auto flash. • A flash mode, in which Monitor preflashes are fired, cannot be used. 3 When using either the optional TTL Multi-Flash Sync Cord SC-27,SC-26, SC-19 or SC-18, turn off all flash units before connecting the master READY flash unit to the remote flash units. FLASH 4 Turn on all remote flash units and set the flash mode on all remote flash unit to TTL auto flash. 5 Confirm the aperture and flash shooting distance as in normal TTL auto flash shooting, then shoot. • See page 17 concerning the TTL auto flash mode. • When the flash has fired at its maximum output and underexposure may have occurred, the ready-light on the SB-800 blinks for approx. 3 sec. To compensate, use a wider aperture or move closer to the subject and reshoot. 92