Nikon SB 800 Instruction Manual - Page 109
or Center-Weighted Metering
UPC - 018208048014
View all Nikon SB 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
1 Set the camera's exposure mode to AperturePriority Auto (A) or Manual (M). 2 Set the camera's metering system to Matrix Metering Y or Center-Weighted Metering W. 3 Set the SB-800's flash mode to TTL auto flash. Advanced operations 4 Position the built-in wide-flash adapter over the flash head. Press the c or d button to adjust the zoom-head position to 14mm or 17mm. 5 Tilt the flash head down to -7°. • When the SB-800 is attached to the camera and used as the only flash unit, this position is recommended to 7° ensure sufficient illumination of the lower portion of the subject in close-up photography. • The dotted line below the underbar appears when the flash head is tilted down to this position. 6 Confirm that the ready-light is on, then shoot. • When the flash has fired at its maximum output and underexposure may have occurred, the ready-light on the SB-800 blinks for approx. 3 sec. To compensate, use a wider aperture or move closer to the subject and reshoot. 103