Nikon SB 800 Instruction Manual - Page 24

1 Installing the batteries 1 Slide open the battery chamber lid in the direction of the arrow. 2 Install the batteries following the i and j marks as shown. Align the battery chamber lid attachment indexes, then close the battery chamber lid by sliding it into place while pressing down. v Usable batteries Install four AA-type penlight batteries (1.5V or lower) of any of these types: (1) Alkaline-manganese (1.5V) (2) Lithium (1.5V) (3) Nickel (1.5V) (4) NiCd (rechargeable, 1.2V) (5) Ni-MH (Nickel Metal Hydride) (rechargeable, 1.2V) • When replacing batteries, replace all four (or five when using the Quick Recycling Battery Pack SD-800) with fresh ones of the same brand. • High-power manganese batteries are not recommended for use with the SB-800. • Always carry extra batteries when traveling. • For details on batteries, refer to "Notes on batteries" on page 115. CAUTION! • Do not use batteries not specified in this instruction manual, as this may cause them to explode, leak corrosive liquids, or catch on fire. • Do not mix battery brands or types, or use old with new batteries. Otherwise the batteries may explode, leak corrosive liquids, or catch on fire. • Do not recharge non-rechargeable batteries in a battery charger. Otherwise the batteries may leak corrosive liquids or generate heat. t Obtaining faster recycling times using 5 batteries Use the provided Quick Recycling Battery Pack SD-800 to install five batteries to shorten the recycling time. See page 64 for more details. 18