Nikon SB 800 Instruction Manual - Page 84
Setting the flash mode, flash output level compensation, values, and channel number on the master
UPC - 018208048014
View all Nikon SB 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Flash shooting in Advanced Wireless Lighting ■■■ Setting the flash mode, flash output level compensation values, and channel number on the master flash unit 1 Press the g button on the master flash unit to highlight "M", then press the a button to choose the desired flash mode. 2 Press the e or f button to increase or decrease the flash output level compensation values. • Compensation values can be set in 1/3 steps from -3.0 to +3.0 EV. • The flash output level can be set from M1/1 to M1/128 in the Manual G mode. 3 Press the g button to highlight "A", then press the a button to set the flash mode on the remote flash unit within group A. • If the master unit's flash mode has been set to Repeating flash, the Repeating flash or Flash canceled mode can be set on the remote flash unit. 4 Following step 2 above, set the flash output level compensation values on the remote flash unit within group A. 5 As in steps 3 and 4, set the flash mode and flash output level compensation values on the remote flash units within groups B and C. 6 Press the g button on the master flash unit to highlight the channel number, then press the e or f button to set the channel number. 78