Nikon SB 800 Instruction Manual - Page 123
If the built-in wide-flash adapter is broken off accidentally, Warning indications in the SB-800
![]() |
UPC - 018208048014
View all Nikon SB 800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
■■■ If the built-in wide-flash adapter is broken off accidentally If the wide-flash adapter is subjected to a strong impact while set on the flash head, it may be broken off. In this case, visit your nearest authorized Nikon service center for repair. • When the wide-flash adapter is broken off, it is no longer possible to set the zoom-head position to other than 14mm or 17mm. To adjust the zoom-head position, go to the Custom Settings "Zoom-head position setting if the built-in wide-flash adapter is broken off accidentally" (p. 67). ■■■ Warning indications in the SB-800 Problem Cause The ready-light blinks for 3 sec. after firing. The underexposure indicator blinks and the amount of underexposure is Underexposure may have occurred. displayed, depending on the camera in use. The dotted line below the underbar appears. The flash head is tilted down -7°. The aperture indicator displays The aperture on the lens is not set at its "FEE" and the shutter cannot be released. minimum. Three beeps sound during wireless multiple The flash has fired at its maximum output flash shooting. and under exposure may have occurred. Ref. page p. 33 p. 23 - p. 89 Reference information 117
![](/manual_guide/products/nikon-sb-800-instruction-manual-c6d8db2/123.png)