NordicTrack E8200 Competition Bench Uk Manual - Page 5

PART IDENTIFICATION CHART Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. Note: Some small parts may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached. M10 x 183mm Bolt (83) M12 Washer (93) M10 Washer (66) M8 Washer (102) M6 Washer (61) M4 Washer (98) M10 Locknut (65) M8 Locknut (84) M6 x 20mm Screw (100) M4 x 15mm Self-tapping Screw (95) M12 x 20mm Patch Bolt (91) M6 x 40mm Screw (80) Set Screw (157) M8 x 45mm Bolt (101) M12 x 63mm Patch Bolt (90) M12 x 70mm Patch Bolt (89) M10 x 70mm Bolt Set (106) M8 x 75mm Carriage Bolt (121) M10 x 75mm Bolt (105) M12 x 75mm Bolt (88) 5