NordicTrack E8200 Competition Bench Uk Manual - Page 7

3. Attach the Front Leg (109) to the Bench Frame (107) with two M10 x 75mm Bolts (105), two M10 3 Washers (66), and two M10 Locknuts (65). Make sure that the Locknuts are in the hexagonal holes in the bottom of the Bench Frame. See step 2. Tighten the M8 Locknuts (84). 109 105 66 107 65 4. Grease the barrel of an M10 x 70mm Bolt Set (106). Attach the Leg Lever (110) to the Front Leg (109) with the Bolt Set. Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Leg Lever. Next, slide a Weight Adapter (156) onto the Leg Lever (110). Then, tighten an M8 x 10mm Set Screw (157) against the Leg Lever. 4 156 106 Grease 110 106 109 157 5. Orient the two Backrest Frames (118) as shown. 5 Attach the Backrest Frames to the Backrest Bracket (111) with four M8 x 45mm Bolts (101), four M8 Washers (102), and four M8 Locknuts (84). Do not tighten the Locknuts yet. 118 101 102 Holes 84 102 101 84 111 7