Oki B6500dn Guide: Network User's, B6500 (English Network User's Guide) - Page 42
Switching the Power On/OFF, Printer Spooling Is Set to [On] Spool Mode, Printing from Windows
View all Oki B6500dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Switching the Power On/OFF Take note of the following when switching off the printer: Printer Spooling Is Set to [On] Spool Mode All the spooled print data, including print data which is being printed, will be saved. When the power is switched on again, the stored print data will be printed first even if new print data has been instructed. Printer Spooling Is Set to [Off] Nonspool Mode All the print data spooled in the printer receive buffer, including print data which is being output, will be deleted. When the printer is switched on again, the print data will not be found. However, if the power is switched off immediately after the print data has been sent, the data may be stored on the computer. In this case, when the power is switched on again, the stored print data will be printed first even if new print data has been sent. Printing from Windows Take note of the following when printing from Windows: > In the spool mode, if the print data is bigger than the remaining capacity of the hard disk or the memory at the point of receiving, the data will not be received by the printer. NOTE > Some client computers may re-send immediately when the print data has exceeded the receiving capacity. When this occurs, the client appears as if it has crashed. To rectify this situation, the client computer must be stopped from sending print data. > In the non-spool mode, printing will commence once data starts to be received by the printer. Therefore, if the printer has accepted a print request from a computer, it will not receive another print request from another computer. > For PCL and DUMP, the specification for the number of copies is invalid. B6500 Network User's Guide Precautions and Limitations - 42