Oki C711WT C711WT Network Guide - Page 25

OPTION MENU In the Option menu, the following item can be selected: ITEM Use TCP/IP Protocol Use IPX/SPX Protocol Environment Setup EXPLANATION If this item is selected, AdminManager uses TCP/IP protocol to search/configure network interface cards. If this item is selected, AdminManager uses IPX/SPX protocol to search/configure network interface cards. TCP/IP Tab Set broadcast addresses that are used to search printers using the TCP/IP protocol. If Use TCP/IP protocol is unchecked, the search will not be carried out using TCP/IP. NetWare Tab Set network addresses that are used to search printers via NetWare protocol. If there any many NetWare file servers on your network, specify the network address to which the network card belongs. If Use NetWare protocol is unchecked, the search will not be carried out using NetWare, but if Auto Search is selected, AdminManager will search all networks that AdminManager can detect. SNMP Tab Obtain the printer name via SNMP Select. Enter Community name. Add and Delete. TimeOut Tab Search Every: Set response waiting time from a network card in seconds. Time Out: Set time out between AdminManager and the network interface card in seconds. Retry: Set how many times the retry will be carried out between AdminManager and the network interface card. HELP MENU In the Help menu, About is available as well as revision information for AdminManager. Network configuration > 25