Oki C711WT C711WT Network Guide - Page 8
Onfiguration, Utilities - manual
View all Oki C711WT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
CONFIGURATION UTILITIES You can configure the network interface (NIC) by using one of the following methods: UTILITY Quick Setup FEATURES Configure the NIC easily and simply without installing any software packages into your system. You can set the following: > Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols. > Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. > Set NetWare Mode and create Queue/Print Server/ Printer objects. > Zone name and Port name for EtherTalk. SYSTEM REQUIREMENTS Windows: Windows 2000 Windows XP Home/Professional Windows XP Professional x64 Edition Windows Server 2003 Windows Server 2003 x64 Edition Windows Server 2008 Windows Server 2008 x64 Edition Windows Vista 32-bit Windows Vista 64-bit (TCP/IP protocol or IPX/SPX protocol should be installed) Mac: Mac OS X 10.3.9 or greater Admin Manager Web Browser Telnet SNMP Configure the NIC in detail. Configure the NIC and printer by using a Web browser such as Microsoft Internet Explorer or Mozilla Firefox. Configure the NIC using TELNET. The machine and network card can be controlled using third-party vendor developed SNMP application. Microsoft Internet Explorer or similar. Operating system that supports Web browser. Third-party vendor developed TELNET client package. Third-party vendor developed SNMP application. USING QUICK SETUP Quick Setup utility allows you to configure the network interface easily and simply without installing any software packages. You can configure the following: > Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols. > Set IP address, Subnet Mask and Gateway for TCP/IP manually or by using DHCP. > Set NetWare mode and create Queue/Print Server/Printer objects. > Zone name and Port name for EtherTalk. Configuration requires a PC with a supported Windows operating system (see above), running TCP/IP or IPX/SPX (NetWare). This utility can only be used on a PC that can be connected to the network with TCP/IP or IPX/SPX. This utility must be used on a PC that is located on the same segment as the printer. 1. Insert the CD-ROM into the CD-ROM drive. The Setup Utility starts automatically. If it does not start, double-click \setup.exe (in the root directory) on the CD-ROM. 2. Select the appropriate language. 3. Accept the Software License Agreement if you have not previously accepted it. 4. Navigate to and select Network Software. Network configuration > 8