Oki MB480 MB460/470/480 User's Guide-Eng - Page 145
Holding the complete assembly by its top centre, lower it into place in the MFP
View all Oki MB480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
8. Place the toner cartridge onto the new image drum cartridge as shown. Push the left end in first, and then lower the right end in. (It is not necessary to fit a new toner cartridge at this time unless the remaining toner level is very low.) 9. Push the colored release lever away from you to lock the toner cartridge onto the new image drum unit and release toner into it. 10.Holding the complete assembly by its top centre, lower it into place in the MFP, locating the pegs at each end into their slots in the sides of the MFP cavity. 11.Close the top cover and press down firmly so that the cover latches closed. 145 • Maintenance
145 • Maintenance
8.
Place the toner cartridge onto the new image drum cartridge as shown. Push the
left end in first, and then lower the right end in. (It is not necessary to fit a new
toner cartridge at this time unless the remaining toner level is very low.)
9.
Push the colored release lever away from you to lock the toner cartridge onto the
new image drum unit and release toner into it.
10.
Holding the complete assembly by its top centre, lower it into place in the MFP,
locating the pegs at each end into their slots in the sides of the MFP cavity.
11.
Close the top cover and press down firmly so that the cover latches closed.