Oki MICROLINE 1120 Users Guide 1 - Page 14
Remove the Top Cover and set the Paper Thickness Lever
View all Oki MICROLINE 1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
1. Turn the printer Power Switch to OFF. 2. Set the Paper Type Lever to cut sheet. 3. Remove the Top Cover and set the Paper Thickness Lever to position 1. 4. Press and hold the LF/FF and the LOAD/EJECT buttons and turn the Power Switch to ON. The amber ALARM indicator should be illuminated to indicate that there is no paper in the printer. 5. With the long side of the paper against the paper guide, insert the paper carefully into the printer. The printer will automatically grip the paper and start the test print. NOTE If required, you can pause the test print by pressing the SEL button and then resume the test print by again pressing the SEL button. 6. When the test print has completed, the paper is automatically ejected. NOTE If you want to stop the test print for any reason, press the SEL button followed by the LOAD/EJECT button to eject the paper. Turn the printer Power Switch to OFF. ML1120/ML1190 User's Guide - Getting started > 14