Oki MICROLINE 1120 Users Guide 1 - Page 46
Button, Status, Function
View all Oki MICROLINE 1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Buttons BUTTON SEL LF/FF LOAD/EJECT TEAR SEL+POWER ON Switch LOAD/ EJECT+SEL LOAD/ EJECT+LF/FF TEAR+SEL TEAR+LF/FF SEL+TEAR Status Function On-line Off-line Sets the printer to off-line. Sets the printer to on-line and disalarms the printer. On-line and off-line On-line and off-line Continuous Forms mode Feeds paper by one line. Holding the button down results in continuous form fed until first line of next page. Feed paper if it is not fed. If the continuous form is in position, press to retract the form to the Pin Tractors. (If the sprocket holes of the last page of the form disengage from the sprocket pins, do not attempt to eject the paper as a paper jam may result.) On-line and off-line Ejects the cut sheet Cut sheet manual mode On-line and off-line Continuous Forms mode Delivers the continuous form to the cut position. If the button is pressed again or data is received, the original form position is restored. On-line and off-line Ineffective Cut sheet manual mode Enters menu mode. On-line and off-line On-line and off-line On-line and off-line On-line and off-line On-line and off-line Microfeed down 0.18 mm (1/144 in) for ML1120 and 0.14 mm (1/180 in) for ML1190 step. Microfeed down 0.18 mm (1/144 in) for ML1120 and 0.14 mm (1/180 in) for ML1190 step. Microfeed down 0.18 mm (1/144 in) for ML1120 and 0.14 mm (1/180 in) for ML1190 step at tear-off position only. Microfeed down 0.18 mm (1/144 in) for ML1120 and 0.14 mm (1/180 in) for ML1190 step at tear-off position only. Quieter print mode Each press of the button pair progresses the printer through Quieter print mode > High multipart print mode > Normal print mode (Effective only for ML1120) ML1120/ML1190 User's Guide - Operating instructions > 46