Oki MICROLINE 1120 Users Guide 1 - Page 81
Make sure that the ribbon is not twisted or damaged when
![]() |
View all Oki MICROLINE 1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
7. In the direction indicated by the arrows, insert the pins at both ends of the ribbon cartridge into the U grooves in the printer until the ribbon cartridge is fully locked. NOTE It may be easier to mount the ribbon cartridge in place if you align it with the topside of the grooves. Also, a slightly loose ribbon may make it easier to mount the ribbon cartridge. 8. Hold the ribbon cartridgewith your fingers pressing on its ribbon guide and slope it upward and inward along the guide rails until the ribbon guide comes in line with the U slot at the top of the cartridge. 9. Turn the blue knob anticlockwise (in the direction of the arrow) to wind up the ribbon. CAUTION! Do not turn the knob clockwise as the ribbon might jam. Make sure that the ribbon is not twisted or damaged when it goes through the gap between the Print Head and the ribbon guide. ML1120/ML1190 User's Guide - Consumables and accessories > 81
![](/manual_guide/products/oki-data-microline-1120-users-guide-5b2dcab/81.png)