Olympus STYLUS TOUGH-8000 STYLUS TOUGH-8000 Instruction Manual (English) - Page 48
Power Save]
View all Olympus STYLUS TOUGH-8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Saving battery power between shots [POWER SAVE] E SETUP X POWER SAVE Submenu 2 OFF ON Application Cancels [POWER SAVE]. When the camera is not being used for approx. 10 seconds, the monitor automatically turns off to save battery power. To resume standby mode Press any button or turn the mode dial. Using the LED illuminator as an auxiliary light [LED ILLUMINATOR] E SETUP X LED ILLUMINATOR Submenu 2 OFF ON Application Disables the LED illuminator. Enables the LED illuminator. "Using the LED illuminator" (p. 24) Displaying the current altitude/ water depth (atmospheric/hydraulic pressure) [MANOMETER] E SETUP X MANOMETER The readings may have a margin of error depending on meteorological conditions. Use the readings only for your reference. Submenu 2 OFF ON CALIBRATE Application Cancels the manometer display. Displays the current altitude/ water depth (atmospheric/ hydraulic pressure) in the shooting standby mode screen. (-10 m to 5,000 m) Proceed to the setting screen. See below. When set to [ON], a warning message appears in the monitor as a water depth close to 10 m (32.8 ft) is reached. To adjust the altitude/water depth display 1 Use 12 to select the current altitude/ water depth, and press the o button to set. CALIBRATE 1200m BACK MENU SET OK Selecting the display units for the manometer [m/ft] E SETUP X m/ft Submenu 2 m ft Application This displays in meters. This displays in feet. 48 EN