Olympus STYLUS TOUGH-8000 STYLUS TOUGH-8000 Instruction Manual (English) - Page 65

Using a separately sold AC - blue

Page 65 highlights

Charging the battery by connecting the camera to a computer To charge the battery, connect the camera to a computer via USB cable, select [EXIT] in the [USB] screen below, and press the o button. USB PC EASY PRINT CUSTOM PRINT EXIT SET OK If the camera is connected to a printer or an old computer, the operation may be unstable, or charging may take longer than that with the included AC adaptor. Charging time varies depending on the performance of a computer or printer. (There may be cases in which it takes approx. 10 hours.) Even if [REMOVE USB CABLE] is displayed, the battery is charging while the charging indicator is lit in orange. Be sure to remove the USB cable after the battery is charged (the charging indicator turns to blue). If the camera without a battery is connected to a computer, by inserting a battery into the camera, the camera will start charging without showing the [USB] screen above. Using a separately sold AC adapter An AC adapter (D-7AC/separately sold) is useful for time-consuming tasks such as image downloads to a computer or when running a slideshow for a long period of time. To use a separately sold AC adapter for this camera, the multi-adapter (CB-MA1/separately sold) is required. The battery can also be charged by connecting the camera with its power turned off to the AC adaptor. Do not use any other AC adapter with this camera. Using a separately sold charger A charger (LI-50C/separately sold) can be used to charge the battery. In this case, remove the battery from the camera and set the battery to the charger. Using your charger and AC adapter abroad • The charger and AC adapter can be used in most home electrical sources within the range of 100 V to 240 V AC (50/60Hz) around the world. However, depending on the country or area you are in, the AC wall outlet may be shaped differently and the charger and AC adapter may require a plug adapter to match the wall outlet. For details, ask at your local electrical shop or travel agent. • Do not use travel voltage converters as they could damage your charger and AC adapter. EN 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86

65
EN
Charging the battery by
connecting the camera to a
computer
To charge the battery, connect the camera to
a computer via USB cable, select [EXIT] in the
[USB] screen below, and press the
o
button.
EASY PRINT
USB
SET
OK
EXIT
CUSTOM PRINT
PC
If the camera is connected to a printer or
an old computer, the operation may be
unstable, or charging may take longer than
that with the included AC adaptor. Charging
time varies depending on the performance
of a computer or printer. (There may be
cases in which it takes approx. 10 hours.)
Even if [REMOVE USB CABLE] is
displayed, the battery is charging while the
charging indicator is lit in orange. Be sure
to remove the USB cable after the battery
is charged (the charging indicator turns to
blue).
If the camera without a battery is connected
to a computer, by inserting a battery into
the camera, the camera will start charging
without showing the [USB] screen above.
Using a separately sold AC
adapter
An AC adapter (D-7AC/separately sold) is
useful for time-consuming tasks such as image
downloads to a computer or when running a
slideshow for a long period of time. To use a
separately sold AC adapter for this camera,
the multi-adapter (CB-MA1/separately sold) is
required. The battery can also be charged by
connecting the camera with its power turned off
to the AC adaptor.
Do not use any other AC adapter with this
camera.
Using a separately sold
charger
A charger (LI-50C/separately sold) can be used
to charge the battery. In this case, remove the
battery from the camera and set the battery to
the charger.
Using your charger and AC
adapter abroad
The charger and AC adapter can be used in
most home electrical sources within the range
of 100 V to 240 V AC (50/60Hz) around the
world. However, depending on the country
or area you are in, the AC wall outlet may be
shaped differently and the charger and AC
adapter may require a plug adapter to match
the wall outlet. For details, ask at your local
electrical shop or travel agent.
Do not use travel voltage converters as they
could damage your charger and AC adapter.