Onkyo CR-N765 User Manual English - Page 14

5. Connecting the power cord Do not use a power cord other than the one supplied with this unit. Before connecting the power cord, connect all of your speakers and components. Always connect the power cord to an AC outlet only after connecting it to the AC INLET terminal of the unit. to an AC outlet Turning on the unit may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the unit into a different branch circuit. Disconnect the power cord only after putting the unit into standby mode. To avoid electrical shock, always disconnect the power cord from the AC outlet before disconnecting the other end. 0 This unit consumes power when in standby mode. 6. Turning on the unit 1. Press the Í button. 0 If you turn on the unit when the input source is set to USB or NET, "Now Initializing..." appears on the display. It will take 20-30 seconds until the unit recognizes the input. To return the unit to standby mode, press the Í button again. About the Auto Standby function: The Auto Standby function is set to "On" by default. This means when the unit is left without audio input for 2 hours, it will automatically enter standby mode. 14 Getting started