Onkyo CR-N765 User Manual English - Page 23

Listening to AM/FM radio Tuning into a radio station Tuning into stations automatically 1. Press the TUNER button repeatedly to select either "AM" or "FM" on the display. 2. Press the ENTER button repeatedly until "AUTO" appears on the display. 3. Press 2 TUN/TUN 1 buttons to start Auto tuning. Tuning into stations manually If you tune into an FM radio station manually, it will be received in monaural sound. 1. Press the TUNER button repeatedly to select either "AM" or "FM" on the display. 2. Press the ENTER button repeatedly until "AUTO" on the display disappears. 3. Press 2 TUN/TUN 1 buttons to select the desired radio station. 0 The frequency changes by 1 step each time you press the button. The frequency changes continuously if the button is held down and stops when the button is released. Tune by looking at the display. 0 You can change the AM frequency step. See "AM Freq. Step" under "Menu settings" under "Various settings". Tuning into stations by frequency It allows you to directly enter the frequency of the radio station you want to listen to. 1. Press the TUNER button repeatedly to select either "AM" or "FM" on the display. 2. Press D.TUN button. 0 Searching automatically stops when a station is found. When tuned into a radio station, the indicator on the display lights. Band Frequency When the reception of FM broadcasts is poor: If the radio wave reception is weak or there is excess noise in your location, refer to "Tuning into stations manually" on the next page to change the reception setting to monaural. This can minimise the noise and audio interruptions. 3. Using the number buttons, enter the frequency of the radio station within 8 seconds. 0 To enter 87.50 (FM), for example, press [8], [7], [5], [0]. If the entered number is incorrect, press the D.TUN button again 8 seconds or more later and reenter the number. 23