Onkyo CR-N765 User Manual English - Page 33
When an error message appears - firmware
View all Onkyo CR-N765 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
"Now Initializing..." appears on the display, followed by the name of the USB flash drive. 0 Loading the USB flash drive takes about 20 to 30 seconds. 7. Press the MENU button to display the menu and use the direction ( / ) buttons to select "Update" and press the ENTER button. 8. Use the direction ( / ) buttons to select "CR via USB?" and press the ENTER button. 0 This selection will not appear (and cannot be selected) if the flash drive does not contain firmware that can be used to update the unit. 9. Select "UpdateStart?" and press the ENTER button. The unit firmware starts to be updated. 10. After "Completed" appears, disconnect the USB flash drive. 11.Press the Í ON/STANDBY button on the front panel to put the unit into standby. 0 Do not use the Í button on the remote control for this operation. 0 If you do nothing for three minutes, the unit will enter standby automatically. The update is complete. The unit's firmware has been updated to the latest version. When an error message appears When an error occurs, "Error!! *-**" or an error message appears on the display of this unit. (Letters and numbers appear in place of the asterisks.) Refer to the descriptions below to check the meaning. Error code *-10, *-20: The USB flash drive could not be recognized. Confirm that the USB flash drive is securely connected to the USB port on the front of the unit. *-14: The root folder of the USB flash drive does not contain a firmware file or the firmware file is for a different model, for example. Others: Disconnect and reconnect the power cord, and retry updating. Various settings 33