Onkyo CR-N765 User Manual English - Page 7
Supplied accessories, Handling the unit
View all Onkyo CR-N765 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Supplied accessories Handling the unit ∫ Remote control (RC-850S) k 1 ∫ Batteries for remote control (AAA/R03) k 2 ∫ Power cord k 1 ∫ AM loop antenna k 1 ∫ Indoor FM antenna k 1 * In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color. Using the remote control Remove the cover from the back of the remote control and insert two AAA/R03 batteries with their i/j ends oriented in the case as shown. Replace the cover. Precautions for use Do not install this unit in a location that could become hot. This includes places that are exposed to direct sunlight or near a radiator, heater, stove or other heating equipment. Moreover, do not place it on top of an amplifier or other equipment that generates heat. Doing so could cause discoloration or deformation. Do not put anything on top of this unit, as it may interfere with proper ventilation. Do not lift or move the unit during playback because the disc rotates at high speed. Doing so could damage the disc. Always remove any loaded disc before moving this unit or packing it for installation in a different location, for example. Moving the unit with a disc inside could cause a malfunction. If the operation range of the remote control decreases, the batteries have become exhausted. In this case, replace the batteries with new ones. Dispose of the used batteries according to the instructions on them or requirements set by your local municipality. 0 If you intend not to use the remote control for a long time, remove the batteries to prevent damage from leakage or corrosion. 0 Expired batteries should be removed as soon as possible to prevent damage from leakage or corrosion. 5 m or less 20° 30° 20° 30° Remote control sensor When using the remote control, point it toward the remote control signal receiver on the main unit from a distance of 5 m or less. 0 Do not place obstructions between the main unit and the remote control. 0 The remote control might not work if the remote control signal receiver on the unit is exposed to direct sunlight or bright light. If this occurs, try moving the unit. 0 Beware that use of this remote control could cause the unintentional operation of other devices that can be controlled by infrared rays. 7