Onkyo TX-NR757 User Manual - Page 44
Surr Back Left, Configuration - Subwoofer.
View all Onkyo TX-NR757 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
>>Specifications >>Settings >>Listening Modes >>Playback Function >>Basic Manual Troubleshooting | Appendix Setting Item Surr Back Right Surr Back Left Surround Left Subwoofer Default Value 0.0 dB 0.0 dB 0.0 dB 0.0 dB Setting Details Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. • The setting cannot be changed if anything other than "No" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. • The setting cannot be changed if anything other than "No" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. Select a value between "-12.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. Select a value between "-15.0 dB" and "+12.0 dB" (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. ˙ 5� Dolby Enabled Speaker Setting Item Dolby Enabled Speaker to Ceiling AccuReflex Default Value (6.0 ft) (Off) Setting Details Set the distance between the Dolby Enabled Speaker and the ceiling. Select between "0.1 ft/0.03 m" to "15.0 ft/4.50 m" (0.1 ft/0.03 m units). • The unit of distance (ft/m) shown is the unit selected for use in "Distance". You can enhance the reflection effect of Dolby Enabled Speakers from the ceiling. "Off": Do not use this function "On": Use this function 12 ˙ 6� Equalizer Settings You can adjust the output volume of the range of each connected speaker. You can adjust the volume of the different sound ranges for each of the speakers. You can set three different equalizers in Preset 1 to 3. You can select up to five bands for the Subwoofer and nine bands for all other speakers. Setting Item Front Center Height Surround Surround Back Subwoofer Default Value 0.0 dB 0.0 dB (0.0 dB) 0.0 dB 0.0 dB 0.0 dB Setting Details After selecting the speaker frequency from between 25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . After selecting the speaker frequency from between 25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . After selecting the speaker frequency from between 25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • The setting cannot be changed if anything other than "No" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. After selecting the speaker frequency from between 25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . After selecting the speaker frequency from between 25 Hz" and "16 kHz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • The setting cannot be changed if anything other than "No" is set in "Configuration" - "Zone Speaker" and Zone 2 is on. After selecting the speaker frequency from between 25 Hz" and "160 Hz" with the cursors / , adjust the volume of that frequency between "-6.0 dB" and "+6.0 dB" with / . • This cannot be selected if "No" is set in "Configuration" - "Subwoofer".