Onkyo TX-RZ840 Owners Manual - English - Page 160
Distance
View all Onkyo TX-RZ840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ Setting Item Double Bass Default Value On Setting Details This can be selected only when "Configuration" - "Subwoofer" is set to "Yes" and "Front" is set to "Full Band". Bass output is boosted by feeding bass sounds from the front right and left, and center speakers to the subwoofer. "On": Bass output is boosted. "Off": Bass output is not boosted. • This function is not automatically set even if AccuEQ Room Calibration is performed. 3. Distance Set the distance from each speaker to the listening position. Setting Item Front Left Center Front Right Height 1 Left Height 1 Right Height 2 Left Height 2 Right Default Value 12.0 ft/3.60 m 12.0 ft/3.60 m 12.0 ft/3.60 m 9.0 ft/2.70 m 9.0 ft/2.70 m 9.0 ft/2.70 m 9.0 ft/2.70 m Setting Details Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Setting Item Surround Right Surr Back Right Surr Back Left Surround Left Subwoofer Default Value 7.0 ft/2.10 m 7.0 ft/2.10 m 7.0 ft/2.10 m 7.0 ft/2.10 m 12.0 ft/3.60 m Setting Details Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Specify the distance between each speaker and the listening position. Specify the distance between each speaker and the listening position. • Default values vary depending on the regions. • The unit of distance can be changed by pressing the MODE button on the remote controller. When using the unit "feet", the setting is available in increments of 0.1 ft from 0.1 ft to 30.0 ft. When using the unit "meter", the setting is available in increments of 0.03 m from 0.03 m to 9.00 m. 160 Front Panel≫ Rear Panel≫ Remote≫