Onkyo TX-RZ840 Owners Manual - English - Page 164
Audio Adjust, Multiplex/Mono, Dolby
View all Onkyo TX-RZ840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ 3. Audio Adjust 1. Multiplex/Mono Change the settings of multiplex audio playback. Setting Item Multiplex Input Channel Mono Input Channel Mono Output Speaker Default Value Main Left + Right Center Setting Details Set the audio channel or language to be output when playing multiplex audio or multilingual broadcasts, etc. "Main": Main channel only "Sub": Sub channel only "Main/Sub": Main and sub channels are output at the same time. • For multiplex audio broadcasts, pressing the button on the remote controller will display "1+1" on the main unit's display. Set the input channel when playing in Mono listening mode digital signals such as Dolby Digital or analog/PCM signals recorded in 2 channels. "Left": Left channel only "Right": Right channel only "Left + Right": Left and right channels Set the speaker to output monaural audio in the Mono listening mode. "Center": Audio is output from the center speaker. "Left/Right": Audio is output from the front L/R speakers. • If the item cannot be selected even though connection is correct, check if the setting in "2. Speaker" - "Configuration" - "Speaker Channels" matches the number of connected channels. 2. Dolby Change the setting of when Dolby signals are input. Setting Item Loudness Management Center Spread* Default Value On Off Setting Details When playing Dolby TrueHD, enable the dialog normalization function which keeps the volume of dialog at a certain level. Note that when this setting is Off, the Late Night function that allows you to enjoy surround at low volumes is fixed to off when playing Dolby Digital Plus/Dolby TrueHD. "On": When this function is used "Off": When this function is not used Adjust the width of the sound field of the front channel when playing in Dolby Audio - Surr listening mode. "On": The sound field is spread to left and right. "Off": The sound field is centralized. • Depending on the speaker settings, "Off" is applied. * This function will not be selectable if the firmware is updated after purchase or the firmware is switched in the product production process. For details of firmware update, see "Additional Function (Firmware Update)" ( p6). 164 Front Panel≫ Rear Panel≫ Remote≫