Onkyo TX-RZ840 Owners Manual - English - Page 182
Multi Zone Sound Check, ARC Setup, Network Connection, Keyboard Input, Wired, Wireless, Scan Networks
![]() |
View all Onkyo TX-RZ840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Contents ≫ Connections ≫ Playback ≫ Setup ≫ speaker connection, perform the connection after disconnecting the power cord. 5. Once the measurement is completed, it is possible to perform the measurement in 8 additional listening positions. To perform the measurement, select "Next" and press ENTER, then follow the instructions. To not perform the measurement, select "Finish (Calculate)" and press ENTER. • After each listening position is detected, select "Finish (Calculate)" and press ENTER to complete the detection process. 6. Disconnect the speaker setup microphone. 3. Multi Zone Sound Check Output test tones to ZONE 2 to enjoy audio in a separate room (ZONE 2) in addition to the main room. 4. ARC Setup To connect with an ARC-compatible TV, select "Yes". The ARC setting on this unit turns on, and you can listen to the TV's audio through this unit. • Pressing "Yes" turns the HDMI CEC function on, and the power consumption in standby mode will increase. 5. Network Connection 1. To make the network connection settings, select "Yes" and press ENTER. • A confirmation screen asking you whether to agree to the privacy statement is displayed during network setting. If you agree, select "Accept" and press ENTER. 2. Select the network connection method and press ENTER. "Wired": Use a wired LAN to connect to a network. "Wireless": Wi-Fi connection using an access point such as a wireless LAN router. • There are two methods for Wi-Fi connection. "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Share the Wi-Fi settings of your iOS device with this unit. • If you select "Scan Networks", there are another two types of connection methods. Check the following. "Enter Password":Enter the password (or key) of the access point to connect. "Push Button": If the access point is equipped with an automatic setting button, you can connect without entering the password. • If the SSID of the access point is not displayed, select "Other..." with the cursor on the SSID list screen, press ENTER, and then follow the on-screen instructions. Keyboard Input To switch between upper and lower cases, select "A/a" on the screen, and press ENTER on the remote controller. To select whether to mask the password with "" or display it in plain text, press MEMORY on the remote controller. Pressing CLEAR on the remote controller will delete all the input characters. 182 Front Panel≫ Rear Panel≫ Remote≫
![](/manual_guide/products/onkyo-txrz840-owners-manual-english-ba4c1ac/182.png)