Onkyo TX-SR343 User Manual - Page 13

3 AM/FM Radio The Basic Manual explains the method using automatic tuning. For manual tuning, see the Advanced Manual. 1. Press TUNER on the remote controller several times to select either "AM" or "FM". 2. Press TUN MODE so that the "AUTO" indicator on the display lights. 3. Press the / cursor buttons. The automatic tuning to a radio station starts. Searching stops when one is tuned. When tuned into a radio station, the "TUNED" indicator on the display lights. The "FM STEREO" indicator lights if the radio station is an FM radio station. ●● Alternatively you can press TUNING on the main unit. TUNED AUTO Actual display varies depending on the country FM STEREO Registering a radio station: You can register up to 40 of your favorite AM/FM radio stations. 1. Tune into the AM/FM radio station you want to register. 2. Press MEMORY on the remote controller so that the preset number on the display flashes. 3. Press CH +/- several times to select a number between 1 and 40 while the preset number is flashing (about 8 seconds). ●● Alternatively you can press PRESET on the main unit. 4. Press MEMORY again to register the station. When registered, the preset number stops flashing. To select a preset radio station, press PRESET on the main unit or CH +/− on the remote controller. ●● To delete a preset station, after selecting the preset station you want to delete, press MEMORY on the remote controller, and with the preset number flashing on the display, press CLR on the remote controller. AM/FM frequency step setting It may be necessary for you to change the frequency step to tune the radio in your area. Change the step with the following procedure. Note that when this setting is changed, all radio presets are deleted. 1 After pressing RECEIVER on the remote controller, press SETUP. 2. Select "5. Hardware" with the cursor and press ENTER. 3. Select "Tuner" with the cursor and press ENTER. 4. Select "AM / FM Frequency Step" (North American and Taiwanese models) or "AM Frequency Step" (European, Australian and Asian models) with the cursor and select the frequency step for your area. (For Taiwanese models only) The setting is "10 kHz / 0.2 MHz" at the time of purchase. Please change it to "9 kHz / 0.05 MHz". Step 3: Playing Back 4 Quick Setup Menu You can perform common settings on the TV screen while playing. 1. Press Q on the remote controller. The Quick Setup menu is displayed on the connected TV's screen. Quick Setup Listening Mode Audio Information MOVIE/TV MUSIC GAME BD/DVD 2. Select the item with the cursors on the remote controller and then press ENTER. ●● To return to the previous screen, press RETURN. 3. Select the setting with the cursors of the remote controller.  Listening Mode: Select the listening mode from the categories of "MOVIE/TV", "MUSIC" and "GAME". After selecting the Listening Mode, press ENTER button to confirm. ●● It cannot be set when audio is played from the TV's speakers.  Audio You can perform various audio settings including audio quality and speaker level adjustment. ●● You cannot select this item when audio is output from the TV's speakers. Bass, Treble: Adjust volume of the front speaker. ●● It cannot be set if the listening mode is Direct. Phase Matching Bass: Suppress phase shift in the midrange to enhance bass sound. Thus smooth and powerful bass sound can be obtained. ●● It cannot be set if the listening mode is Direct. Center Level, Subwoofer Level: Adjust the speaker level while listening to the sound. The adjustment you made will be reset to the previous status when you turn the unit to standby mode. ●● Changes may not be possible depending on the speaker settings. En-13