Onkyo TX-SR343 User Manual - Page 56
Reference Information
View all Onkyo TX-SR343 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Reference Information Linked Operation with CEC-compatible Components Link operation with a product conforming to the CEC of the HDMI standard. Note that linked operation is not always guaranteed with all CEC devices. Operation has been confirmed on the following devices (as of February 2015). TV (Random order): ●● Toshiba TV sets ●● Sharp TV sets Players/Recorders (Random order): ●● Onkyo and Integra RIHD-compatible players ●● Toshiba players and recorders ●● Sharp players and recorders (only when used together with Sharp TV sets) Caution: For linking functions to work properly, do not connect more RIHD-compatible components than the quantities specified below, to the HDMI jacks. Linking functions are not guaranteed when more RIHD-compatible components than the below mentioned quantities are connected. Furthermore, do not connect the AV receiver to another AV receiver/AV amplifier via HDMI. ●● Blu-ray Disc/DVD players: up to 3. ●● Blu-ray Disc/DVD recorders: up to 3. ●● Cable TV tuner, terrestrial digital tuner, and satellite broadcasting tuner: up to 4 units. Checking whether the HDMI Linked Operation Settings Are Enabled 1. Turn on the power of all connected components. 2. Turn off the power of the TV, and confirm that the power of the connected components is turned off automatically with the link operation. 3. Turn on the power of the Blu-ray Disc/DVD player/ recorder. 4. Start playback on the Blu-ray Disc/DVD player/recorder, and verify the following: ●● The AV receiver automatically turns on, and selects the input to which the Blu-ray Disc/DVD player/ recorder is connected. ●● The TV automatically turns on, and selects the input to which the AV receiver is connected. 5. Following the operating instructions of the TV, select "Use the TV speakers" from the menu screen of the TV, and confirm that the audio is output from the speakers of the TV, and not from the speakers connected to the AV receiver. 6. Select "Use the speakers connected from the AV receiver" from the menu screen of the TV, and confirm that the audio is output from the speakers connected to the AV receiver, and not from the TV speakers. Caution: ●● Even if you set to output audio on the TV speakers, audio will be output from the speakers connected to the AV receiver when you adjust the volume or switch the input on the AV receiver. To output audio from the TV speakers, redo the corresponding operations on the TV. ●● In case of an RIHD connection with RI and RI EX audio control compatible components, do not connect the RI cable at the same time. ●● On the TV, when you select anything other than the HDMI jack to which the AV receiver is connected, the input on the AV receiver will be switched to "TV". ●● The AV receiver will automatically power on in conjunction when it determines it to be necessary. Even if the AV receiver is connected to an RIHD compatible TV or player/recorder, it will not power on if it is not necessary. It may not power on in conjunction when the TV is set to output audio from the TV. ●● Linked system functions with the AV receiver may not work depending on the component model connected. In such cases, operate the AV receiver directly. En-36 Reference Information ●● When the player/recorder cannot be operated with the remote controller of the AV receiver, the corresponding component may not be programmed to support the remote controller operation of CEC. Program the remote control code of the component maker to the remote controller for using.