Oster NEW Oskar 2-in-1 Salad Prep and Food Processor Instruction Manual - Page 7
Care & Cleaning
View all Oster NEW Oskar 2-in-1 Salad Prep and Food Processor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
CARE & CLEANING NOTE: Do not attempt to sharpen the cutting edges of the chopping blade or the reversible disc. They are permanently sharpened at the factory and will be ruined by attempted sharpening. CLEANING NOTE: Whenever possible, rinse parts immediately after processing for easy cleanup. CAUTION: Turn unit off and unplug from outlet before putting on or taking off parts, and before cleaning. • Wipe base and feet with a damp cloth and dry thoroughly. Never use a harsh detergent or abrasive cleaner. CAUTION: to protect against risk of electrical shock, do not put food processor base or electrical cord in water or any other liquid. • All removable parts can be washed by hand or in a dishwasher. - If washing by hand, wash in hot sudsy water, rinse, and dry thoroughly. If necessary, use a small nylon bristle brush to thoroughly clean the bowl and food chute/cover, this type of brush will also help prevent cutting yourself on the sharp chopping blade and slice/ shred disc. - If washing in a dishwasher, place removable parts on the top rack only. CAUTION: Blade and processing disc are sharp. Handle carefully. • Some foods, such as carrots, may temporarily stain the bowl. To remove stains, make a paste of 2 tablespoons baking soda and 1 tablespoon warm water. Apply the paste to the stains and rub with a cloth. Rinse with sudsy water and dry. • Do not use rough scouring pads or cleansers on any plastic or metal parts. • Do not fill the bowl with boiling water or place any of the parts in boiling water. STORAGE CAUTION: Blade and processing disc are sharp. Handle carefully. Store appliance in a clean, dry place with the chopper bowl and cover in the unlocked position. TROUBLESHOOTING Problem Possible Cause Solution Food is being processed unevenly or the food processor is moving across the work surface. You are overloading the chopper bowl. The food processor vibrates or there are signs that the chopping blade or slice/shred disc is hitting the chopper bowl while the processor is operating. The chopping blade or slice/ shred disc has not been assembled properly. Liquid leaks from the bottom of Too much liquid in the bowl. the chopper bowl. Cover does not move freely when attached to the chopper bowl. The edges might need lubricating. Food falls over in the food chute during slicing. The food chute has not been well packed or uneven pressure has been applied to the food pusher during processing. Unit stops and will not come back on. Unit does not work. The unit is plugged into an outlet that is not working. The unit is not plugged in. Next time, process this amount in two or more batches. Stop the food processor immediately and assemble the chopping blade or slice/shred disc properly. Process smaller amounts. Use a small amount of vegetable oil to lubricate the edges of the chopper bowl and cover. Cut pieces in even lengths just a little shorter than the length of the food chute. Pack the chute carefully and maintain an even pressure on the food pusher as the food is being processed. Verify outlet is not working by plugging another appliance then plug into a working outlet. Verify that unit is plugged in. 12 FPSTFP4xxx_15ESM1.indd 12-13 www.oster.com www.oster.com 13 12/16/15 09:06