Panasonic BL-C1CE Ip Camera - Page 88
IP Address or, POP3 Server
View all Panasonic BL-C1CE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Operating Instructions Setting How to authenticate Description You can select the authentication method: [No authentication], [POP before SMTP authentication] and [SMTP authentication]. POP server authentication may be required by your ISP. In that case, set POP before SMTP authentication. • No authentication: No authentication when sending an email. • POP before SMTP authentication: Some SMTP servers that send e-mails do not have an authentication feature. Therefore, the camera uses the authentication of a POP server that receives e-mails, before sending e-mails. - POP3 Server If you set a server IP address, set 4 IP Address or numbers (0-255) and 3 periods, such as Host Name*1: "192.168.0.253". Note that "0.0.0.0" and "255.255.255.255" are not available. Or set a host name (0-255 characters). - Port No.: Enter a number (1-65535). Usually set to 110. - Login ID*2: If your ISP requires a login ID to log in to a POP3 server, set it (1-63 characters). - Password*2: If your ISP requires a password to log in to a POP3 server, set it (0-63 characters). • SMTP authentication: Users are authenticated by user name and password on the SMTP server. Your ISP must support the SMTP authentication. Only the LOGIN and PLAIN authentication mechanisms are supported. - Login ID*2: If your ISP requires a login ID to log in to an SMTP server, set it (1-63 characters). - Password*2: If your ISP requires a password to log in to an SMTP server, set it (0-63 characters). *1 Note that [Space and [>] are not available. *2 Note that ["] is not available. 88