Panasonic BL-C20A Ip Camera - Page 86
Setting Sensor Log Notification
UPC - 037988845057
View all Panasonic BL-C20A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Operating Instructions 4.5 Setting Sensor Log Notification A sensor log sent once a day at a specified time can be checked. To enable Sensor Log, set Motion Detection for Trigger Setting and check [Enable]. 1. Click [Sensor Log] on the Setup page. When enabling the image/buffer transfer setting and selecting Motion Detection in the Trigger page, the Sensor log window is displayed. 2. Set each parameter. Note • • • Click [Save] to save the settings. Clicking [Cancel] cancels your settings without saving changes. Clicking [Save] deletes new-arrival sensor logs. 86
Operating Instructions
86
4.5
Setting Sensor Log Notification
A sensor log sent once a day at a specified time can be checked. To enable Sensor
Log, set Motion Detection for Trigger Setting and check [Enable].
1.
Click [Sensor Log] on the Setup page.
When enabling the image/buffer transfer setting and selecting Motion
Detection in the Trigger page, the Sensor log window is displayed.
2.
Set each parameter.
Note
•
Click [Save] to save the settings.
•
Clicking [Cancel] cancels your settings without saving changes.
•
Clicking [Save] deletes new-arrival sensor logs.