Panasonic BL-C20A Ip Camera - Page 94
Specifying Operation Time
UPC - 037988845057
View all Panasonic BL-C20A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Operating Instructions 5.3 Specifying Operation Time The Operation Time page allows you to limit the time that the camera is in use. The camera image turns to a gray screen outside operation time. Note • Your privacy may be compromised if the time period is set incorrectly. Confirm the time period after the setup. • If you access the camera as an administrator, you can view the image outside the time period. 1. Click [Operation Time] on the Setup page. 2. Click a No. to set the operation time. Note If No. 1-7 are disabled, the camera can always be operated. 3. Check [Enable], set the time, and click [Save] • Clicking [Cancel] takes you back to the previous page without saving changes. 94
Operating Instructions
94
5.3
Specifying Operation Time
The Operation Time page allows you to limit the time that the camera is in use. The
camera image turns to a gray screen outside operation time.
Note
•
Your privacy may be compromised if the time period is set incorrectly.
Confirm the time period after the setup.
•
If you access the camera as an administrator, you can view the image
outside the time period.
1.
Click [Operation Time] on the Setup page.
2.
Click a
No.
to set the operation time.
Note
If No. 1—7 are disabled, the camera can always be operated.
3.
Check [Enable], set the time, and click [Save]
•
Clicking [Cancel] takes you back to the previous page without saving
changes.