Panasonic DMC-ZS60 Owners Manual - Page 60
Wireless access point is not displayed.
View all Panasonic DMC-ZS60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Others It cannot connect to the wireless LAN. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection • Use within the communication range of the wireless LAN network. • If any device, such as microwave oven, cordless phone, etc., that uses 2.4 GHz frequency are used nearby this unit simultaneously, radio waves may get interrupted. → Use them sufficiently away from the device. • When the battery indicator is flashing red, the connection with other equipment may not start or the connection may be disrupted. (A message such as [Communication error] is displayed.) • When this unit is placed on a metal table or shelf, the connection may not be established easily because the camera is affected by radio waves. Use the camera away from metal surfaces. About a wireless access point • Check if the wireless access point to connect is in operating state. • The camera may not display or connect to a wireless access point depending on the radio wave condition. → Perform the connection closer to the wireless access point. → Remove the obstacles between this unit and the wireless access point. → Change the direction of this unit. → Move the location or change the angle of the wireless access point. → Perform the [Manual Input]. • It may not display even if the radio waves exist depending on the setting of the wireless access point. • If the network SSID of the wireless access point is set not to broadcast, it may not be detected. → Enter and set the network SSID. Alternatively, set the network SSID of the wireless access point to broadcast. • Connection types and security setting methods are different depending on the wireless access point. → Refer to the operating instructions of the wireless access point. • When the 5 GHz/2.4 GHz switchable wireless access point is connected to other equipment using the 5 GHz band, it cannot be used simultaneously with this camera if it is not compatible. → The use of a wireless access point that can use 5 GHz/2.4 GHz simultaneously is recommended. 60 SQT1166 (ENG)