Panasonic DMCG5 DMCG5 User Guide - Page 17
Preparation, Changing the Lens, Align the lens fitting marks
![]() |
View all Panasonic DMCG5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Preparation Changing the Lens • Check that the camera is turned off. • Change lenses where there is not a lot of dirt or dust. Refer to P213, P214 when dirt or dust gets on the lens. Attaching the lens 1 Turn the lens rear cap A and the body cap B in the direction of the arrow to detach them. • Do not put your hands inside the mount. 2 Align the lens fitting marks C (red marks) on the camera body and the lens and then rotate the lens in the direction of the arrow until it clicks. • Do not press the lens release button D when you attach a lens. • Do not try to attach the lens when holding it at an angle to the camera body as the lens mount may get scratched. 3 Detach the lens cap. - 17 -
![](/manual_guide/products/panasonic-dmcg5-dmcg5-user-guide-2a97a0f/17.png)
- 17 -
Preparation
Changing the Lens
•
Check that the camera is turned off.
•
Change lenses where there is not a lot of dirt or dust. Refer to
P213
,
P214
when dirt or dust gets on
the lens.
1
Turn the lens rear cap
A
and the body cap
B
in the direction of the arrow
to detach them.
•
Do not put your hands inside the mount.
2
Align the lens fitting marks
C
(red marks) on
the camera body and the lens and then rotate
the lens in the direction of the arrow until it
clicks.
•
Do not press the lens release button
D
when you attach
a lens.
•
Do not try to attach the lens when holding it at an angle
to the camera body as the lens mount may get
scratched.
3
Detach the lens cap.
Attaching the lens