Panasonic DMCG5 DMCG5 User Guide - Page 73

Basic You can conserve the battery life by setting these menus. Also, it will turn off the LCD monitor automatically when not in use to prevent discharge of the battery. [Economy] [Sleep Mode]: The camera is automatically turned off if the camera has not been used for the time selected on the setting. [10MIN.]/[5MIN.]/[2MIN.]/[1MIN.]/[OFF] [Auto LCD Off]: The LCD monitor is automatically turned off if the camera has not been used for the time selected on the setting. [30MIN.]/[5MIN.]/[2MIN.]/[1MIN.] • Press the shutter button halfway or turn the camera off and on to cancel [Sleep Mode]. • To turn the LCD monitor on again, press any button or touch the LCD monitor. • Since [Economy] is canceled when the eye sensor auto switching is performed, it is recommended to use this mode with [LVF/LCD Auto] in [Eye Sensor] (P170) set to [OFF]. • [Sleep Mode] does not work in the following cases. - When using the AC adaptor (optional) - When connecting to a PC or a printer - When recording or playing back motion pictures - During a slide show [USB Mode] Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied). y [Select on connection]: Select either [PC] or [PictBridge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge. { [PictBridge(PTP)]: Set after or before connecting to a printer supporting PictBridge. z [PC]: Set after or before connecting to a PC. - 73 -