Panasonic DMCG5 DMCG5 User Guide - Page 223
Bright spot not in subject is recorded., lighting fixture.
![]() |
View all Panasonic DMCG5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Others Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture. • This is characteristic of MOS sensors which serve as the camera's pickup sensors. This is not a malfunction. • When you see noticeable flicker or striping while recording a motion picture, you can reduce the flicker or striping by setting up [Flkr Decrease] (P162) and fixing the shutter speed. It is possible to select a shutter speed from [1/50], [1/60], [1/100], or [1/120]. The brightness or the hue of the recorded picture is different from the actual scene. • When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed may introduce slight changes to brightness and color. These are a result of the characteristics of the light source and do not indicate a malfunction. • When recording subjects in extremely bright locations or recording under fluorescent lighting, LED lighting fixture, mercury lamp, sodium lighting, etc., the colors and screen brightness may change or horizontal striping may appear on the screen. Bright spot not in subject is recorded. • There may be defective pixels in the image sensor. Perform [Pixel Refresh] (P77). You cannot compensate the exposure. • Are you in Exposure Compensation operation? > Press the rear dial to switch to Exposure Compensation operation. (P88) The function lever does not work. > Set the [Function Lever] to [AUTO]. (P15) Subject cannot be locked. (AF tracking not possible) • If the subject contains sections that differ in color to the surroundings, touch those sections or the main colors of the subject to set the AF frame (P97). Operation sound is small. • Is your finger covering up the speaker? (P10) - 223 -
![](/manual_guide/products/panasonic-dmcg5-dmcg5-user-guide-2a97a0f/223.png)