Panasonic DMCZS6 DMCZS5 User Guide - Page 16

Inserting and removing the card (optional)/ the battery (Continued) Picture save destination (cards and built-in memory) Pictures will be saved to a card if one is inserted, or to the built-in memory if not. ■ Built-in memory (approx. 15 MB , approx. 40 MB ) ●Pictures may be copied between cards and the built-in memory (→137). ●The access time for the built-in memory may be longer than the access time for a card. ●Clipboard pictures (→110) are saved to built-in memory. ●[QVGA] in [REC QUALITY] can only be available to record motion pictures in the built- in memory. ■ Compatible memory cards (optional) The following SD standard-based cards (Panasonic brand recommended) Type of Card Capacity Notes SD memory 8 MB - 2 GB • Can be used with devices compatible with the respective cards formats. SDHC memory 4 GB - 32 GB • Before using SDXC memory cards, check your computer cards and other devices support this type of card. SDXC memory 48 GB - 64 GB http://panasonic.net/avc/sdcard/information/SDXC.html cards • Cards in capacities not listed at left are not supported. ●Please reformat the card with this camera if it has already been formatted with a computer or another device. (→28) ●If the write-protect switch is set to 'LOCK', the card cannot be used to record or delete pictures, and it cannot be formatted. ●It is recommended that you copy important pictures to your computer (as electromagnetic waves, static electricity, or faults may cause data to be damaged). ●Latest information: Switch http://panasonic.jp/support/global/cs/dsc/ (This Site is English only.) (LOCK) Remaining battery and memory capacity Remaining battery (only when using battery) (flashes red) If the battery mark flashes red, recharge or replace battery. (→11) Pictures remaining ( Displayed when no card is inserted (pictures will be saved to built-in memory) →174, →176) When in operation (Card) or (Built-in memory) are illuminated red. While the light remains lit, an operation is taking place, such as picture writing, reading, deletion or formatting. While the light is lit, do not turn off the power or remove battery, card, AC adaptor (optional) or DC coupler (optional) (this can cause data loss or damage). Do not subject the camera to vibrations, impact, or static electricity. Should any of these cause camera operation to be terminated, attempt to perform the operation again. 16 VQT2R20